Qedit 5.9 for HP-UX

Change Notice

Doc-To-Help Standard Manual

by Robelle Solutions Technology Inc.


 

 

Program and manual copyright © 1977-2014 Robelle Solutions Technology Inc.

Permission is granted to reprint this document (but not for profit), provided that copyright notice is given.

 

Qedit and Suprtool are trademarks of Robelle Solutions Technology Inc. Windows is a trademark of Microsoft Corporation. Other product and company names mentioned herein may be the trademarks of their respective owners.

I)

Robelle Solutions Technology Inc.

7360 – 137 Street, Suite 372

Surrey, B.C. Canada V3W 1A3

Phone:   604.501.2001

Fax:      604.501.2003

E-mail:  sales@robelle.com

E-mail:  support@robelle.com

Web:     www.robelle.com


Contents

Introducing Qedit/UX 5.9                                                                                          1

Introduction........................................................................................................... 1

Qedit for Windows.................................................................................................. 1

Highlights In Version 5.9......................................................................................... 1

Highlights In Version 5.8.01.................................................................................... 2

Highlights In Version 5.8......................................................................................... 2

Highlights In Version 5.7......................................................................................... 2

Compatibility........................................................................................................ 2

CPU Serial Number (uname)..................................................................................... 3

Known Problems.................................................................................................... 3

Documentation....................................................................................................... 3

User Manual.............................................................................................. 3

Change Notice............................................................................................ 3

Printed Documentation................................................................................ 3

Installation                                                                                                                   5

Overview............................................................................................................... 5

Installation Instructions............................................................................................ 5

Installation Assistance............................................................................................. 5

Enhancements Since Version 5.6                                                                         7

Introduction........................................................................................................... 7

Qedit for Windows                                                                                                     9

Introduction........................................................................................................... 9

Server Process........................................................................................................ 9

HP-UX 10.20/11.0...................................................................................... 9

Port Number............................................................................................ 10

Bugs Fixed                                                                                                                 13

Bugs Fixed Since Version 5.7................................................................................. 13

 


Introducing Qedit/UX 5.9

Introduction

Qedit is our fast and efficient full-screen editor and development home base for HP-UX systems, both workstations and minicomputers. One of our objectives for Qedit is to give PowerHouse and COBOL developers all the necessary capabilities to perform their work from a single program.

We are constantly enhancing Qedit with new features and fixes requested by users. Not only does this change notice include a description of Qedit's enhancements, it includes detailed installation steps and a list of other changes for host-based Qedit. This change notice also includes a description of the server portion of Qedit for Windows.

Host-based Qedit is also available for MPE, with virtually identical features. If you would like more information, please contact Robelle Solutions Technology Inc.

Qedit for Windows

Our newest editor, Qedit for Windows, now gives you the familiar Windows interface for editing both MPE/iX and HP-UX files, all from a single program. Qedit for Windows is the next generation of our popular editor, which consists of a Windows editing client and either an MPE/iX or HP-UX editing server that work together to edit host files. Since its release, we have focused our development efforts on Qedit for Windows, adding more functionality and continuing to expand its capabilities. If you would like to upgrade to Qedit for Windows, please contact Robelle Solutions Technology Inc.

 

Highlights In Version 5.9

á       Qedit now recognizes files with the extension of .COB and .cob as Cobol files on HP-UX.

á       Qedit now support long user names on HP-UX 11.31, implemented by lugadmin.

á       Qedit now supports the HP-UX Long Password feature on HP-UX 11.31. Error messages have been improved for login issues.

á       Qedit would return a status code of 123 upon exit even if an error had not occurred.

 

 

Highlights In Version 5.8.01

á       Qedit for HP-UX would return 123 as a return code even if no error had occurred.

 

Highlights In Version 5.8

á       Visual Mode updates would fail with Bad format error if the length of the file was less than 52.

á       Qedit did not recognize .cpy files as being Cobol.

á       Regular Expressions. Qedit would improperly report the error  "String longer than maximum allowed" if the expression specified is longer than the window of the rangelist.

á       Shadow Passwords. Qedit for HP-UX did not support Shadow Passwords properly for all versions of HP-UX.

Highlights In Version 5.7

This is an overview of all the changes implemented in this version.

á       A rangelist can now have an AND keyword with up to 10 search strings. All strings must be found on a single line for the line to be selected. Each string can have its own search window.

á       Escape sequences to set/reset terminal tab stops appear in output file when Qedit's output is redirected as in
$ qedit > qedit.out
Qedit now resets the tab stops when running in interactive mode only. Redirection is assumed to be batch mode.

The following enhancements have been implemented in the Qedit for Windows server.

á       The server correctly returns error 90 when the modified record length is greater than the maximum allowed in the current workfile.

Compatibility

Qedit/UX is compatible with most versions of HP-UX 10.20 and later.

IMPORTANT: As of HP-UX 11.0, HP has dropped support for block-mode terminals. For this reason, full-screen editing is available in Screen mode or by enabling the Blockemulation option on HP-UX 11.0 and later.

Qedit commands are added to the Redo stack before variable substitution occurs (Set Varsub On) i.e. with the variable name. So, if the variable value changes between the time the command is entered and the time it is retrieved from the stack, the results may be different. It's also important to note that commands related to Redo stack operations such as Listredo, Do, Before can not have trailing comments enclosed in curly braces anymore. The comments are not removed and likely cause a syntax error.

In the examples in this document, we have used HP-UX 10.20 conventions and assumed Qedit is installed in the /opt/robelle directory.

CPU Serial Number (uname)

Qedit/UX runs only on CPUs whose serial numbers (the "uname" on HP-UX) have been encoded. If it fails to run and you see an "invalid HPSUSAN" error message, call Robelle for assistance.

Known Problems

There are no known problems at the moment.

Documentation

User Manual

The user manual contains the full description of all the Qedit commands, as well as usage tips. The manual is up-to-date with all the latest changes incorporated in Qedit. To see only the changes in the latest version, see the "What's New" section of the manual, or see the change notice.

You can download the files from the Robelle web site at http://www.robelle.com/library/manuals/.

 

Change Notice

For a complete description of the latest changes made to Qedit, the installation instructions, and any compatibility issues, see the change notice that was included with the release.

Printed Documentation

The latest user manual and change notice are available in Adobe PDF format. If you do not already have the Adobe Acrobat Reader, you can get a copy from http://www.adobe.com/prodindex/acrobat/readstep.html.

 

 


Installation

Overview

The following instructions describe the installation process of a new Suprtool release. The new version overwrites an existing version of Suprtool on your HP-UX system.

Installation Instructions

There are typically two main types of installations. The first and most often utilized is the Download instructions. You can find the HP-UX download install instructions here:

http://www.robelle.com/downloads/install-qxprod.html

Tape installation instructions can be found here:

http://www.robelle.com/support/install/tape/qxprod.html

Installation Assistance

If you have any questions or run into any problems, please call us. Technical support is available on weekdays from 8 a.m. to 4 p.m. Pacific time at 1.800.453.8970. Technical support can also be obtained via e-mail at: support@robelle.com  If your new version of software will not run, you can page someone from technical support by calling the 1.800 number, or you can typically easily run extend with the disaster option to tide you over until business hours. Instructions for this are available at:

http://www.robelle.com/disaster/

 


Enhancements Since Version 5.6

Introduction

The following sections describe the new enhancements to Qedit/UX since the last major release. The number in brackets at the end of each section indicates the version in which the feature was first introduced.

á       A rangelist can now have an AND keyword with up to 10 search strings. All strings must be found on a single line for the line to be selected. Each string can have its own search window. [5.6.10]

á       Qedit for HP-UX now supports the LongPassword feature available as a separate downloadable product in HP-UX 11.31 otherwise known as 11i3.

á       Qedit for HP-UX, will now give an error status number when a login fails.

á       Qedit for HP-UX, now recognizes files with an extension of .COB or .cob as Cobol files on HP-UX.

 


Qedit for Windows

Introduction

Qedit for Windows lets you edit local MPE/iX and HP-UX files from a single MS Windows program. It consists of a Windows editing client and either an MPE/iX or HP-UX editing server that work together to edit your host files. To take advantage of Qedit for Windows, you need both the Qedit client and the Qedit server.

Qedit for Windows uses the popular TCP/IP protocol for communicating between the client and the server (this is the same protocol that you use to access the Web).  Configuring the Qedit server software requires creating the correct TCP/IP environment for Qedit for Windows.

Server Process

Qedit clients can connect to Qedit/UX only if the Qedit/UX daemon process is running (the Qedit/UX daemon process cannot be started from inetd).  This process listens for connections on a registered port number (described below).  To allow users to connect to the Qedit/UX daemon process, you must log on as root and issue this command:

qedit -d

The Qedit/UX daemon process should always be running, so it is a good idea to automatically start the daemon as part of the system startup process. On HP-UX 9.0, this is done by adding the following command to the file /etc/rc:

/opt/robelle/bin/qedit -d

HP-UX 10.20/11.0

On HP-UX 10.20 and up, you do not modify the startup shell script.  Instead, you need to create a number of files. The HP-UX documentation states that the following characters cannot be used as part of the file names: [.,~#]. Otherwise, you can choose any name for these files, as long as the names are consistent throughout the process. In our example, we use qedit_server.

You first need to create a control file in /etc/rc.config.d.  This file sets a control variable that will be checked by the startup script. If the control variable is set to 1, the server will start; if it is not equal to 1, the server will not start.  We will use QEDIT_SERVER as our variable name.  The /etc/rc.config.d/qedit_server control file will now contain the following:

# ****** File:  /etc/rc.config.d/qedit_server ******

# Qedit for Windows server configuration.

#

# QEDIT_SERVER:    Set to 1 to start

#                  Qedit for Windows server

 

QEDIT_SERVER=1

Next, you need a shell script that will actually start the server. You can copy a template of the shell script from /sbin/init.d/template.

cd /sbin/init.d

cp template qedit_server

Modify the file so that it contains the necessary commands to start the server. You have to change all occurrences of CONTROL_VARIABLE to the variable name you used in the control file (i.e., QEDIT_SERVER).

You also need the execute command for the server program.  Insert this command (underlined below) in the section after the 'start') string. The section looks like this:

'start')

 

      # source the system configuration variables

      if [ -f /etc/rc.config ] ; then

              . /etc/rc.config

      else

         echo "ERROR: /etc/rc.config defaults file MISSING"

      fi

 

      # Check to see if this script is allowed to run...

      if [ "$QEDIT_SERVER" != 1 ]; then

         rval=2

      else

 

      # Execute the commands to start your subsystem

         /opt/robelle/bin/qedit -d

      fi

      ;;

Finally, you need a symbolic link to specify when the script in /sbin/init.d will be executed at boot time. Typically, you would start the server as the last step at run level 3.  Get a list of all the startup files in /sbin/rc3.d with

ls /sbin/rc3.d/S*

Link names in this directory follow a set of conventions. The names start with the letter S or K. S links are startup scripts; K links are shutdown or "kill" scripts.  The next three characters in the name represent an execution sequence number. This number must be 3 digits, and its value should be a number greater than the highest value on the ls listing.  For example, if the last link is called S100nfs.server, you could use S111qedit_server.  Create the symbolic link with

ln -s /sbin/init.d/qedit_server /sbin/rc3.d/S111qedit_server

For the time being, you do not need a "kill" link.

Port Number

By default, Qedit/UX listens on port number 7395.  This port number has been registered with the Internet Naming Authority, so you should not have any conflicts with other HP-UX tools for the same port number.  If there is a conflict, you can start the Qedit server process with a different port number. For example,

qedit -d5678

tells Qedit to listen to port number 5678 instead of the default number (7395).  If you change the port number on the Qedit/UX server, you must also change the port number on every Qedit client to the same value (5678 in this example).  Client port numbers can be changed in the Server Settings dialog box of the Options menu.

If you want listings from netstat and other networking tools to identify the port number as "qwin" instead of just "7395," you have to change the /etc/services file so that it includes the Qedit port number.

qwin    7395/tcp     #Robelle Qedit for Windows


Bugs Fixed

Bugs Fixed Since Version 5.7

The following problems have been fixed since the last production version.

á       Exit code. Qedit would improperly set the exit code to 123 even if no errors had occurred during the qedit session.

á       Regular Expressions. Qedit would improperly report the error "String longer than maximum allowed" if the expression specified is longer than the window of the rangelist.

á       Shadow Passwords. Qedit for HP-UX did not support Shadow Passwords properly for all versions of HP-UX.

á       Visual Mode. Visual updates would fail with Bad format error if the length of the file was less than 52.

á       Text Command. Qedit did not recognize .cpy files as being Cobol.